Studi Experimental Terhadap Perpindahan Kalor Pada Tumbukan Multiple Droplets Dengan Variasi Frekuensi Tetesan
Penulis/Author
Indro Pranoto, Ph.D. (1); DANNYS ARIF KUSUMA (2); TEGUH WIBOWO (3); Ir. Fauzun, S.T., M.T., Ph.D., IPM., ASEAN Eng. (4); Prof. Dr. Eng. Ir. Deendarlianto, S.T., M.Eng. (5); Prof. Dr. Ir. Indarto, DEA., IPM., ASEAN Eng. (6)
Tanggal/Date
29 2018
Kata Kunci/Keyword
Abstrak/Abstract
The effect of drop frequencies and surface temperature on the maximum spreading ratio, heat transfer rate and heat transfer coefficient of convection have been studied experimentally. The experiments were carried out by investigating different values of drop frequencies at 250, 400 and 600 drops/minute. The surface material of stainless steel with a temperature range of 120°C to 200°C was used in the study. An image processing technique was used to measure the diameter of droplets that were captured by using a high-speed camera. The results of the study show that by increasing frequency of drops has improved significantly the maximum spreading ratio, heat transfer rate and heat transfer coefficient of convection. The results also shown that by increasing the drop frequency has increased accordingly the droplet contact with the surface. It was found that, at higher surface temperature has contributed to the increase of the heat transfer rate and convection heat transfer coefficient. This study suggest that the peak and wetting limit conditions has occurred at the surface temperature of 180°C.
Rumpun Ilmu
Teknik Mesin (dan Ilmu Permesinan Lain)
Bahasa Asli/Original Language
Bahasa Indonesia
Level
Nasional
Status
Dokumen Karya
No
Judul
Tipe Dokumen
Aksi
1
2022-Jurnal Nasional METAL-Full Paper.pdf
[PAK] Full Dokumen
2
2022-Jurnal Nasional METAL-Halaman Cover_Editorial_Daftar Isi.pdf
